home *** CD-ROM | disk | FTP | other *** search
- Path: telepost.no!usenet
- From: lasse@ucom.no (Lasse E. Haugen)
- Newsgroups: comp.dcom.modems
- Subject: Re: tornado modem
- Date: Mon, 22 Jan 1996 17:51:59 GMT
- Organization: Ucom AS
- Message-ID: <4e0iv7$odj@nms.telepost.no>
- References: <4dtdjg$7qb@aladdin.rotterdam.luna.net>
- NNTP-Posting-Host: drammensnett206.telepost.no
- X-Newsreader: Forte Free Agent 1.0.82
-
- >chippie@luna.nl wrote:
- >I have the following problem,
-
- >There is a BBS that I frequently phone, but that BBS number is also a
- >fax. So when you send a fax it recognizes that you send a fax and when
- >you want to connect to the BBS it recognizes that you want to be on
- >the BBS. And here it goes wrong.
- >All the time I want to connect to the BBS the BBS/FAX is switching to
- >fax, so my terminal program (telix for windows) will not connect to
- >the bbs. Sometimes it works but most off the time I don't get a
- >connection to the BBS.
-
- >I use a tornado modem 28K8. I have no problems on onther BBS boards.
-
- >Any suggestions?
-
- Yes, I hope so :-)
-
-
- It seems that your Tornado modem does not have the caling tone.
- As fare as I remebmer it should be 1100hz for fax communication and
- 1300hz for modem/data communication (or was it the other way??)
- Anyway if you disconnect your modem from the telephoneline, -> turn
- speaker on highes level (ATL3) and the force your modem to use blind
- dialing with ATX3 you can hear the calling tone in your modemspeaker.
-
- Try this command in your Telix program :
-
- ATL3X3S6=3DT11
-
- Afther the modem has diale'd the 11 you schould be able to hear
- calling tone ("beep" pause "beep")
-
- Lasse
-
-